Create a temporary Wi-Fi network to use the remote camera.

    The remote camera for Stop Motion Studio requires a wifi connection. If no Wi-Fi is available or the Wi-Fi connection is limited, you can try using the hotspot feature of your mobile device to create a temporary Wi-Fi network.

    To set up a hotspot on your mobile device, follow these general steps. The exact process may vary slightly depending on the make and model of your device and the operating system it uses (iOS, Android, etc.).

    ### Setting up a Mobile Hotspot on Android:

    1. **Open Settings:**
      - Navigate to the "Settings" app on your Android device.

    2. **Go to "Network & Internet" or a similar section:**
      - Look for the "Network & Internet" or a similar option in the settings.

    3. **Select "Hotspot & Tethering" or similar:**
      - Find and tap on the "Hotspot & Tethering" option.

    4. **Activate the Hotspot:**
      - Toggle the switch to turn on the Mobile Hotspot.

    5. **Configure Hotspot Settings:**
      - You may have the option to set a network name (SSID) and password for your hotspot. Customize these settings as needed.

    6. **Connect Other Devices:**
      - On the device you want to connect, open Wi-Fi settings, and look for your hotspot network. Enter the password if prompted.

    ### Setting up a Mobile Hotspot on iOS (iPhone):

    1. **Open Settings:**
      - Launch the "Settings" app on your iPhone.

    2. **Go to "Personal Hotspot":**
      - Look for the "Personal Hotspot" option in the settings.

    3. **Activate the Hotspot:**
      - Toggle the switch to turn on the Personal Hotspot.

    4. **Configure Hotspot Settings:**
      - You might be prompted to set a Wi-Fi password. Customize the password and note it down.

    5. **Connect Other Devices:**
      - On the device you want to connect, go to Wi-Fi settings, and look for your iPhone's hotspot network. Enter the password if prompted.
    Published